Maintaining Your Machine - Gestetner F104 Settings Manual

StellaF2_EN_Combine_F_FM.book Page 183 Friday, February 14, 2003 5:16 PM

9. Maintaining Your Machine

Loading Paper in the Optional Paper Tray
Unit
Important
❒ Make sure that copying or printing
of received fax messages is not in
progress before performing the
following procedure.
Note
❒ You can load up to 500 sheets in
the optional paper tray unit.
A A A A
Pull out the paper tray until it
stops.
B B B B
While pinching the release lever,
adjust the back fence and side
fences.
C C C C
Push the metal plate down, and
then square the paper and load it
in the tray.
Note
❒ Load paper with the printable
side facing up.
❒ Fan the paper before loading it
in the tray.
❒ Make sure not to load paper
over the limited mark.
Important
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
D D D D
Readjust the back fence and side
fences.
Important
❒ When loading small quantities
o f p ape r, be car eful n ot to
squeeze in the side fence too
much or paper will not be fed
properly.
E E E E
Push the paper tray in until it
stops.
183