StellaF2_EN_Combine_F_FM.book Page 211 Friday, February 14, 2003 5:16 PM
Note
❒ You can load only custom sized paper to the bypass tray (option for Type1)
when making copies or using the PC Printing function (optional).
❒ Load OHP transparencies to the bypass tray (option for Type1) one sheet at a
time, and remove it from the paper tray immediately after the copying is com-
plete.
❒ Load postcards or envelopes in landscape orientation (L) in the bypass tray
(optional for Type1).
Non-recommended paper
Do not use the paper listed below. Using these kinds of paper may cause paper
jams.
• Curled, wavy, creased or dog-eared paper
• Torn paper
• Paper with holes
• Paper with an unsmooth surface
• Paper with an slippery surface
• Thin and soft paper
Important
❒ The printed image may not be clear if the surface of the paper is rough.
❒ Do not use any paper with coating, such as thermo-sensitive paper, art paper,
aluminum foil, carbon paper, or conductive paper. Using such paper may re-
sult in malfunction.
❒ Do not use copy paper that has been already copied on. Using such paper
may result in malfunction.
Specifications
10
211