Gestetner F104 Settings Manual page 16

StellaF2_EN_Combine_F_FM.book Page 134 Friday, February 14, 2003 5:16 PM
Key Operator Settings
Deleting a specified sender
A Press 0 0 0 0 or 1 1 1 1 to select "3. De-
lete Sender".
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to display the
specified sender you want to
delete.
D Press the { { { { OK} } } } key.
Printing a list of specified senders
A Press 0 0 0 0 or 1 1 1 1 until "4. Print
Sender List" is displayed.
7
B Press the { { { { OK} } } } key.
C Press the { { { { Start} } } } key.
The list is printed out.
K K K K
Press the { { { { User Tools} } } } key.
The standby display reappears.
134
Remarks on Two-sided Reception
Limitation
❒ To use this function, all pages of
the received document must be of
the same size. Inform the sending
party of this beforehand if neces-
sary. You must also have paper set
in your machine of the same size as
that sent by the sending party. This
machine will correctly scan land-
1
s c a p e 8 / " x 1 4 " , 8
2
1 1
8 / "x13", 8 / "x13", 8
2 4
A4. The following table shows the
results that can be achieved when
sending and receiving using this
machine.
❒ This feature works only when mes-
sages are received with Memory
Reception.
❒ If there is no paper in your ma-
chine that matches the size of a re-
c eived m essage , t he m ac hin e
chooses a paper size based upon
the paper you have available (see
p.84 "When There Is No Paper of
the Correct Size"). Two-sided Re-
ception works only when the ma-
chine chooses the tray for which
the Two-sided Printing function is
turned on.
❒ Printouts may vary depending on
how the sender set them.
1
/ " x 1 1 " ,
2
1
/ "x14", and
4
ZHMX010E