G3 Analog Line - Gestetner F104 Settings Manual

StellaF2_EN_Combine_F_FM.book Page 158 Friday, February 14, 2003 5:16 PM
Key Operator Settings
M M M M
Press the { { { { OK} } } } key.
N N N N
Press the { { { { User Tools} } } } key.
The standby display reappears.

G3 Analog Line

You need to make settings for the G3–
1 Analog Line before you connect the
machine to a standard G3 analog line,
and for the G3–2 Analog Line to con-
nect to a G3 analog line by installing
the optional extra G3 interface unit.
❖ ❖ ❖ ❖ G3–1 Analog Line
• Own Fax Number (CSI) (up to
20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.
7
• Line Type
Select whether the connected
line uses tone or pulse dialing.
• Select Line
When your machine is connect-
ed through a PABX, change the
Select Line setting to Extension.
If it is connected directly to the
telephone network, leave it set
to Outside.
• Outside Access Number
Use this setting if your machine
is connected to a PABX that re-
quires you to dial certain num-
ber such as "0" followed by a
pause to connect to the outside
line. By registering "0" as the
PSTN Access Number, a pause
will be inserted automatically
after the "0" when dialing.
158
❖ ❖ ❖ ❖ G3–2 Analog Line
• Own Fax Number (CSI) (up to
20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.
• Line Type
Select whether the connected
line uses tone or pulse dialing.
• Select Line
When your machine is connect-
ed through a PABX, change the
Select Line setting to Extension.
If it is connected directly to the
telephone network, leave it set
to Outside.
• Outside Access Number
Use this setting if your machine
is connected to a PABX that re-
quires you to dial certain num-
ber such as "0" followed by a
pause to connect to the outside
line. By registering "0" as the
PSTN Access Number, a pause
will be inserted automatically
after the "0" when dialing.
Note
❒ The Own Fax Number (CSI) is
passed to the other party when
you send or receive a fax. When
the Own Fax Number is received,
it is shown on the display or print-
ed on reports on the receiver's or
sender's machine. The Own Fax
Number works even if the receiver
or sender uses a different make of
machine.
❒ The Line Type function is not
available in some areas.