Gestetner F104 Settings Manual page 17

StellaF2_EN_Combine_F_FM.book Page 135 Friday, February 14, 2003 5:16 PM
❒ If another party sends you a fax
and their machine is not able to de-
tect the size of the original correct-
ly, the message may come out
truncated, separated or containing
excess white space when printed at
your end. For example, if the send-
ing machine thinks a 8
original is a 8
will be printed at your end on
1
8 / "x14" size paper even if you
2
1
have 8 / "x11" paper available in
2
your machine.
Note
❒ It is recommended that you print
the specified sender List and keep
it after registering or editing set-
tings for this function. See p.134
"Printing a list of specified send-
ers".
❒ You can choose to print messages
from specified senders, or messag-
es from senders you specify on
both sides of paper with the User
Parameters. See p.146 "User Pa-
rameters" (switch 35; bit 1,0).
❒ You can program specified send-
ers for the following six functions:
Authorized Reception, Memory
Lock, Multi-copy Reception, Speci-
fied Tray, Two-sided Reception,
and Forwarding. The maximum
number of specified senders is 50.
❒ You can use up to 24 characters
when registering a specified send-
er for G3 communication. You can
also specify wildcards. See p.86
"Entering Characters", Basic Fea-
tures.
❒ If the specified sender's fax ma-
chine is of the same make as your
machine, register the sender name
registered to their machine. If the
specified sender's fax machine is of
a different make, register the fax
number.
1
/ "x11"
2
1
/ "x14" original, it
2
Using Key Operator Settings
❒ You can check the sender name or
sender's fax number registered to
the fax machines of specified send-
ers in the Journal. See p.40 "Print-
ing the Journal".
❒ When a received message is print-
ed on both sides of paper, the
Length Reduction function cannot
be used. See p.82 "Page Separation
and Length Reduction".
❒ The first page of a document sent
along with the Label is printed on
the back side of the Label if the sent
message is printed using the Two-
sided Reception function. See p.58
"Label Insertion".
❒ If messages are sent using the
Batch Transmission function when
Two-sided Reception is turned on,
the first page of a document might
be printed on the back side of pa-
per on which the last page of an-
other document is printed. See
p.66 "Batch Transmission".
❒ When a message sent using Re-
duced Image Transmission is
printed on both sides of paper,
there is extra space on the left edge
of the front and back sides of the
paper. See p.19 "Reduced Image
Transmission".
7
135