Polling Transmission Clear Report - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 18 Friday, February 14, 2003 5:16 PM
Transmission Options
Note
❒ You can choose "Save" or "Sin-
gle Use" as a default with the
User Parameters. See p.146 "Us-
1
er Parameters".
J J J J
Press the { { { { OK} } } } key.
K K K K
Press the { { { { Start} } } } key.
Your original is scanned.
Note
❒ You can cancel transmission of
a message set up for Polling
Transmission. See p.25 "Cancel-
ing a Transmission or Recep-
tion".
- Polling Transmission with Other - - -
Manufacturers' Fax Machines
Standard Polling Transmission only
works with machines of the same
make that have the Polling Reception
feature. However, if the other party's
fax machine supports Polling Recep-
tion and SEP Code Polling Reception,
you can send documents using the
SEP code instead of the Polling ID.
Reference
p.12 "SEP Code Polling Reception"
p.49 "SEP/PWD (SEP Code Poll-
ing Transmission)"
18
Polling Transmission Clear
Report
This report allows you to verify
whether Polling Transmission has
taken place.
Limitation
❒ This report is not printed if the
stored documents are saved for re-
peatedly use. See p.16 "Polling
Transmission" .
Note
❒ You can turn this function on or off
with the User Parameters. See
p.146 "User Parameters" (switch
03, bit 6).
❒ You can set whether the sent image
is printed on the report with the
User Parameters. See p.146 "User
Parameters" (switch 04, bit 7).
❒ You can also check the result of a
Polling Transmission with the
Journal. See p.40 "Printing the
Journal" .