Batch Original Documents Transmission - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 57 Friday, February 14, 2003 5:16 PM
When deleting the stored pages
A Press 0 0 0 0 or 1 1 1 1 to select "De-
lete", and then press the { { { { OK} } } }
key.
Batch Original Documents
Transmission
When sending a fax message which
has a large number of pages, you can
divide and scan the original docu-
ments in parts to store in the memory,
and then send the whole data in one
transmission.
Preparation
You need to program this function
to a User Function key. See p.105
"User Function Keys".
Limitation
❒ Immediate Transmission is not
available. Use Memory Transmis-
sion.
Note
❒ You cannot send batch document
data using Parallel Memory Trans-
mission.
A A A A
Make sure the Memory Transmis-
sion indicator is lit.
Note
❒ If it is not, press the { { { { Memory
Trans.} } } } key.
B B B B
Press the User Function key ( { { { { F1} } } }
to { { { { F10} } } } ) with the Batch Original
Documents Transmission func-
tion programmed in.
Transmission Features
C C C C
Place the first stack of originals.
Note
❒ You can set up to 70 pages (A4
1
and 8 / "×11") or 30 pages
2
1
(8 / "×14") of originals at one
2
time.
D D D D
Select any scan settings as neces-
sary.
E E E E
Dial the destination number.
F F F F
Press the { { { { Start} } } } key.
The machine starts scanning the
originals.
When the scanning of the placed
originals is complete, the follow-
ing display appears.
Important
❒ Do not attempt to add more
originals into the ADF while
scanning is in progress. Doing
so may result in a paper jam.
G G G G
Place the next stack of documents.
Note
❒ Set the document within 60 sec-
onds. If time runs out, an error
will occur and transmission will
not take place.
H H H H
Press the { { { { Start} } } } key.
When the machine finishes scan-
ning the placed originals, the fol-
lowing display appears.
Note
❒ If you have more originals to be
scanned, repeat the procedure
from G.
3
57