Table of Contents
Advertisement
the display toggles between
"Save" and "Use once".
Note
To delete the document im-
mediately after transmission,
select "Use once". To repeat-
edly send the document, se-
lect "Save".
E
Press [OK].
The "Transmission Mode" menu is
shown. A check mark is added to
"Polling TX".
Note
To cancel the Polling Transmis-
sion, press [Cancel]. The Trans-
mission Mode menu is shown.
F
Press [Exit].
The standby display is shown.
Note
"Polling TX" is displayed. If
you set up other advanced
transmission functions (except
Polling Reception), "Others" is
displayed.
G
Press the {Start} key.
Note
You can cancel transmission of
a message set up for Polling
Transmission.
ing a Transmission"
Polling Transmission Clear
Report
This report allows you to verify
whether Polling Transmission has
taken place.
Limitation
This report is not printed if the
User Parameters are set to allow
the stored documents to be repeat-
edly sent ("Standby").
"Changing the User Parameters"
Note
This report is turned on by default.
You can turn it off if you wish.
P.236 "Changing the User Parame-
ters"
By default, a portion of the sent im-
age is printed on the report. You
can turn this off with the User Pa-
rameters.
P.236 "Changing the
User Parameters"
You can also check the result of a
Polling Transmission with the
Journal.
P.142 "Printing the Jour-
nal"
Polling Transmission
P.129 "Cancel-
P.236
123
4
Advertisement
Table of Contents
