No Document, No Dial; Blank Sheet Detect - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 61 Friday, February 14, 2003 5:16 PM
B B B B
Press the Quick Dial key the Auto
Document is stored in.
The message "
" appears on the display and
Doc.
then the standby display reap-
pears.
C C C C
Specify the destination.
D D D D
Press the { { { { Start} } } } key.

No Document, No Dial

If you dial a destination fax number
and for some reason take your docu-
ment back to your desk and another
person places a different document,
their document could be sent to the
wrong destination. To avoid such
mistakes, when this feature is turned
on, you cannot dial a destination un-
less your document is set.
Note
❒ The standby display when this fea-
ture is turned on.
❒ This feature is turned off by de-
fault. If you want to turn this fea-
ture on, please contact your service
representative.
Retrieved Auto
Transmission Features

Blank Sheet Detect

This feature is designed to help you
avoid making mistakes while scan-
ning documents.
If you try and scan in an almost com-
pletely blank original, an alarm
sounds and the following display ap-
pears. Make sure the original is not
blank.
Limitation
❒ This feature is not supported in
copier mode.
Note
❒ Transmission is not cancelled even
if the machine detects the original
is blank.
❒ With Memory Transmission, the
alarm sounds as soon as the origi-
nal has been scanned. To cancel the
t r a n s m i s s i o n ,
{ { { { Clear/Stop} } } } key while the "
Page(s) are Blank
on the display.
❒ You can turn Blank Sheet Detect on
or off with the User Parameters.
See p.146 "User Parame ters"
(switch 11, bit 2).
3
p r e s s t h e
Some
" is appears
61