Auto Document - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 60 Friday, February 14, 2003 5:16 PM
Other Transmission Features
A A A A
Place the original you want to
send along with the Label, and se-
lect any scan settings as neces-
sary.
B B B B
Press the Quick Dial key that the
Label is stored in.
The message "
" appears on the display and
Doc.
then the standby display reap-
pears.
3
C C C C
Specify the destination fax num-
ber with Label Insertion set to
"On" in one of the following
ways:
• Press the Quick Dial key that
the destination fax number is
stored in.
• Press the { { { { Speed Dial} } } } key and
enter the code of the Speed Dial
that the destination fax number
is stored in.
D D D D
Press the { { { { Start} } } } key.
60
Retrieved Auto

Auto Document

This feature allows you to automati-
cally attach a registered document as
the first page of the original you want
to transmit. It is handy to store Labels
or maps beforehand to use this func-
tion.
You can send an Auto Document
along with another document, or just
send it on its own.
Preparation
You need to register the docu-
ments or images to be sent along
with the original using this feature
in advance. See p.101 "Auto Docu-
ments".
Note
❒ Although you can specify scan set-
tings when sending an Auto Docu-
ment, these settings will only
apply to the document you send
along with the Auto Document.
T h e s e t t i n g s u s e d w h e n y o u
scanned and stored the Auto Doc-
ument will apply to the Auto Doc-
ument itself.
❒ If you send another document
with an Auto Document, the Auto
Document is sent first.
Reference
p.62 "Quick Dial", Basic Features
p.71 "Speed Dial", Basic Features
A A A A
Place the original you want to
send along with the Auto Docu-
ment, and select any scan settings
as necessary.
To send just an Auto Document,
start the following procedure from
step B.