Specifying An End Receiver - Gestetner F104 Advanced Features

StellaF2_EN_Combine_F_FM.book Page 22 Friday, February 14, 2003 5:16 PM
Transmission Options
- Transfer Request with Other -
- -
Manufacturers' Fax Machines
1
Transfer Request only works with
machines of the same make that have
the Transfer Station function. Howev-
er, you can specify other manufactur-
ers' fax machines as the Transfer
Station if they support a similar func-
tion to this, with the SUB Code Trans-
mission function. Make sure the other
party supports this function before
making a Transfer Request. See p.47
"SUB/SID (SUB Code Transmis-
sion)" and p.11 "SUB Code Transmis-
sion".

Specifying an End Receiver

When you make a Transfer Request,
you must specify the final destina-
tions (End Receivers) for your mes-
sage.
You cannot enter the numbers of the
End Receivers directly. Instead, enter
a simple code that describes where
the numbers are stored in the Trans-
fer Station (in Quick Dial keys, Speed
Dials, or Groups).
The numbers must first have been
stored in Quick Dial keys, Speed Di-
als, or Groups in the Transfer Sta-
tion(s).
❖ ❖ ❖ ❖ Quick Dial
Enter { { { { q q } } } } followed by the num- q q
ber (three digits) of the Quick Dial
where the End Receiver is stored.
For example, to choose the number
stored in Quick Dial 001 in the
Transfer Station, enter:
{ { { { q q } } } } { { { { 0} } } } { { { { 0} } } } { { { { 1} } } } . q q
22
Note
❒ If the End Receivers only sup-
port two digits for the Quick Di-
als, enter the number with 2
digits like { { { { q q } } } } { { { { 0} } } } { { { { 1} } } } . q q
❖ ❖ ❖ ❖ Speed Dial
Enter { { { { q q } } } } { { { { p p } } } } followed by the
q q p p
Speed Dial code (two or three dig-
its).
For example, to choose the number
stored in Speed Dial 012 in the
Transfer Station, enter: { { { { q
{ { { { 0} } } } { { { { 1} } } } { { { { 2} } } }
Note
❒ If the End Receivers only sup-
port two digits for the Speed Di-
als, enter the number with two
digits like { { { { q q q } } } } { { { { p q
❖ ❖ ❖ ❖ Group Dial
Enter { { { { q q } } } } { { { { p p } } } } { { { { p p } } } } followed by
q q p p p p
the Group number (two digits).
For example, to choose the number
stored in Group 04 in the Transfer
Station, enter: { { { { q q } } } } { { { { p q q
{ { { { 4} } } } .
q q } } } } { { { { p q p } } } } p p
p } } } } { { { { 1} } } } { { { { 2} } } } . p p
p } } } } { { { { p p p p } } } } { { { { 0} } } } p p