Changing A User Code - Gestetner DSm755 General Settings Manual

I
Select the functions to be used with the user code from Available Functions.
J
Press [OK].
K
Press [Exit].
L
Press the {User Tools/Counter} key.
Note
❒ User codes can contain up to eight digits.
❒ To register the name, see "Registering Names".
Reference
p.163 "Registering Names"

Changing a User Code

Following describes the procedure for changing a registered use code.
Important
❒ Even if you change a user code, the counter value will not be cleared.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
Authentication Information
6
169