Gestetner DSm755 General Settings Manual page 21

Checking the Signal
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A
Press [System Settings].
B Press [Interface Settings].
C Press [IEEE 802.11b].
D
Press [Wireless LAN Signal].
The machine's radio wave status appears.
E After checking radio wave status, press [Exit].
Press the {User Tools/Counter} key to return to the User Tools / Counter / Inquiry
F
menu.
Note
❒ To check the radio wave status, press [IEEE 802.11b] under [LAN Type] on the
[Network] screen.
Connecting to the Interfaces
1
13