Gestetner DSm755 General Settings Manual page 69

❖ WINS Configuration
You can specify the WINS server settings.
If [On] is selected, specify the WINS Server IPv4 address as "xxx.xxx.xxx.xxx"
("xxx" indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter [Scope ID] using up to 31 alphanumeric characters.
• On
• Primary WINS Server: 000.000.000.000
• Secondary WINS Server: 000.000.000.000
• Scope ID
• Off
❖ IPv4 over 1394
When you use the IPv4 over 1394 function of the IEEE 1394 interface to con-
nect the machine to the network, or you print from computer with the IPv4
over 1394 driver, you must specify [Active] for [IPv4 over 1394].
• Active
• Inactive
Printing with IPv4 over 1394 is possible under Windows Me/XP and Win-
dows Server 2003.
❖ SCSI print (SBP-2)
When you print using the SCSI print client function supported by Windows
2000/XP, or Windows Server 2003, you must set [SCSI print (SBP-2)].
• Active
• Inactive
❖ Bidirectional SCSI print
Specifies the printer's response mode etc. for status requests when using the
IEEE 1394 interface.
• On
• Off
If this is set to [Off] bidirectional communication will not work.
Interface Settings
2
61