Gestetner DSm755 General Settings Manual page 191

O
Press [SMB].
P
Use "Direct Specification" or "Browse Network" to specify the path.
To specify a folder, enter its path directly or select it by referring to the net-
work. For details, see "To locate the folder manually" or "Using Browse Net-
work to locate the folder".
Q
Press [Connection Test] to check the path is set correctly.
R
Press [Exit].
S
Press [OK].
T
Press [Exit].
Note
❒ To register the name, see "Registering Names".
❒ You can enter up to 64 characters for the user name.
❒ You can enter up to 64 characters for the password.
❒ To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.
❒ If the connection test fails, check the settings, and then try again.
❒ When Do not Specify is selected, the SMB User Name and SMB Password
that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.
❒ If User Authentication is specified, contact your administrator.
Reference
p.163 "Registering Names"
p.184 "To locate the folder manually"
p.184 "Using Browse Network to locate the folder"
Registering Folders
183
6