Gestetner DSm755 General Settings Manual page 75

❖ Reception Protocol
Specify Reception Protocol for "Auto E-mail Notification".
For details about the "Auto E-mail Notification" function, see the Web Image
Monitor Help.
• POP3
• IMAP4
• SMTP
❖ POP3 / IMAP4 Settings
Specify the POP3/IMAP4 server name for sending or receiving e-mail.
The POP3/IMAP4 server name specified here is used for [POP before SMTP].
• Server Name
If DNS is in use, enter the host name.
If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address.
Enter POP3/IMAP4 server name using up to 127 characters. Spaces cannot
be entered.
• Encryption
• Auto
Password encryption is automatically set according to the POP/IMAP
server settings.
• On
Encrypt password.
• Off
Do not encrypt password.
❖ Administrator's E-mail Address
On e-mailed scanned documents, if the sender is not specified this appears as
the sender's address.
If you have specified the user name and e-mail address in [SMTP Authentica-
tion], make sure to specify this setting.
Enter within up to 128 alphanumerical characters.
On e-mailed scanned documents, if [Auto Specify Sender Name] is [Off], specify
the sender.
❖ E-mail Communication Port
Specify the port number for sending or receiving e-mail. The POP3 port num-
ber specified here is used for [POP before SMTP].
• POP3: 110
• IMAP4: 143
• SMTP: 25
Enter a port number between 1 and 65535 using the number keys, and then
press the {#} key.
File Transfer
2
67