Scan Settings - Gestetner DSm755 General Settings Manual

Gestetner dsm755: operating instruction
Hide thumbs Also See for DSm755:
Table of Contents

Advertisement

Scan Settings

This section describes various items of [Scan Settings] under [Scanner Features].
Default settings are shown in bold type.
❖ Wait Time for Next Orig.: Exposure Glass
When dividing originals and scanning them individually with the exposure
glass to form a single file, select [Continuous Wait], [Off], or [Set Wait Time] for the
waiting status.
• Continuous Wait
• Off
• Set Wait Time: 60 second(s)
If you select [SADF] in [Original Feed Type] on the Scan to Folder screen, the [Wait
Time for Next Orig.: Exposure Glass] setting becomes invalid.
If you select [Batch] in [Original Feed Type] on the Scan to Folder screen, the
[Wait Time for Next Orig.: Exposure Glass] setting becomes invalid, and the ma-
chine waits for an additional original to be put in place.
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing
additional originals with the number keys. Scanning will start if additional
originals are placed and the {Start} key is pressed within this time. You can
end scanning and begin transmission by pressing the {#} key within this time.
Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals
until the {#} key is pressed. Scanning will start when additional originals are
placed and the {Start} key is pressed. You can end scanning and begin send-
ing by pressing the {#} key.
If originals are placed in the auto document feeder (ADF), transmission will
start without waiting for additional originals after all originals in the ADF
have been scanned, regardless of the specified settings.
If a paper misfeed occurs or any of the following operations is performed
while the machine is waiting for additional originals, the countdown stops
and does not start again until the {#} key is pressed.
• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the {Interrupt} key to activate the copy mode
Scan Settings
5
155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents