Gestetner DSm755 General Settings Manual page 50

System Settings
❖ Warm-up Beeper (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
• On
• Off
❖ Copy Count Display (copier/Document Server)
2
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
• Up
• Down
❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
• Copier
• Document Server
• Printer
• Scanner
❖ Print Priority
Print Priority is given to the mode selected.
• Display Mode
• Copier/Document Server
• Printer
• Interleave
• Job Order
When [Interleave] is selected, the current print job will be interrupted after a
maximum of five sheets.
❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function.
This is useful if you are making many copies and have to change settings for
each copy. If you set a longer reset period, you can prevent interruption from
other functions.
The default time is "3 second(s)".
• Set Time
• Immediate
When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
❖ Interleave Print
Set the number of sheets to be output at the time of operation by interruption.
The machine is shipped from the factory with this value set to "10 sheets".
42