Gestetner DSm755 General Settings Manual page 197

N
Press [FTP].
O
Press [Change] under Server Name.
P
Enter the server name, and then press [OK].
Q
Press [Change] under Path.
R
Enter the path.
S
Press [OK].
T
Press [Change] under "Port No."
U
Enter Port No..
V
Press [Connection Test] to check the path is set correctly.
W
Press [Exit].
X
Press [OK].
Y
Press [Exit].
Note
❒ To register the name, see "Registering Names".
❒ You can enter up to 64 characters for the user name.
❒ You can enter up to 64 characters for the password.
❒ You can enter a server name using up to 64 characters.
❒ You can enter an absolute path, using this format: "/user/ home/user-
name"; or a relative path, using this format: "directory/sub-directory".
❒ If you leave the path blank, the login directory is assumed to be the current
working directory.
❒ You can also enter an IPv4 address.
❒ You can enter a path using up to 128 characters.
❒ To change the port number, press [Change] under Port No.. Enter the port
number using the number keys, and then press {#}.
❒ Specify the port number within the range of 1 to 65535.
Registering Folders
189
6