User Function Keys; Programming A User Function Code; Using A Function Program - Gestetner 9920 Operator's Manual

Other Features

User Function Keys

There are two Function keys (F1 and
F2) on the operation panel.
You can program each of these keys
with a feature that you wish to use
frequently.
Store a User Function Code in the
User Function Keys.
Programming a User Function
Code
4
You can program each of the User
Function Keys with one of the follow-
ing functions.
Code
01
02
03
04
05
06
•F1 : Journal is default
To store a User Function Code, do the
following procedure.
A
Press the { { { { Function} } } } { { { { 3} } } } { { { { 5} } } } and
{ { { { Yes} } } } key.
Note
At this time, you can print a
User Function List if you press
W {Start}.
Fk
PRINT LISTh/SEARCHi
B
Press one of the User Function
Keys.
76
Function
Journal
TTI ON
GROUP KEY
Dial Option
Batch Transmission
Forwarding
F1-F2/hi
F2 PROGRAM?Y/hi
Note
Example: Press the {F2} {Yes}
keys.
If the key is already used, the
currently stored code is dis-
played.
C
Press the { { { { Yes} } } } keys.
F2 KPAD/SEARCHi
CODE kk
D
Enter the two-digit code for the
function that you wish to or
search with W W W W or V V V V store.
F2
CODE 03 GROUP KEY
Note
Example: Group Dial key, press
{03}.
E
Press the { { { { Yes} } } } key.
F2
PROGRAMMED
F
Press the { { { { Function} } } } Key.

Using a Function Program

A
Press the {F1} or {F2} key.
B
Use the function as normal.
Y/N/hi
Y/N/hi