Table of Contents
Advertisement
If you delete the RTI/CSI
A Press the { { { { No} } } } key.
Important
If you delete all the RTIs and
CSIs for a forwarding station,
you must also delete the for-
warding station (see step B).
If you do not do this, all in-
coming messages will be for-
warded to that station.
B Press the { { { { Yes} } } } key. Then go
back to step D D D D .
G
Press the { { { { Yes} } } } key to store it as a
wild card.
FORWARD
SET RTI/CSI?
Otherwise
A Press the { { { { No} } } } key.
H
Press the { { { { Function} } } } key to finish.
Edit or input another RTI/CSI for
this forwarding station:
A Press the { { { { Yes} } } } key and Go to
step D D D D .
To work on another forwarding
station:
A Press the { { { { No} } } } key. Go to step
B B B B .
Important
If you switch the forwarding
on and program no RTI/CSI,
all incoming messages are
forwarded.
Switching forwarding on / off
(Function 62)
Before you use Forwarding, you have
to switch it on using Function 62. If it
is switched off, the machine will not
forward any incoming fax messages.
A
Press the { { { { Function} } } } { { { { 6} } } } then en-
ter the access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } {2}.
Then press { { { { 6} } } } { { { { 2} } } } and the { { { { Yes} } } }
key.
SELECT LINE
B
Scroll through the list of features
with V V V V until the screen is as
Y/N
shown.
FORWARDING ON/OFF
C
Press the { { { { Yes} } } } key.
FORWARDING
ON
D
Change the on/off setting by
pressing W W W W or V V V V .
E
Press the { { { { Yes} } } } key.
F
Press the { { { { Function} } } } key to finish.
Selecting which messages to
forward
To choose which messages are for-
warded, adjust bit 7 of switch 8 with
the User Parameters. Two settings are
available.
• Forward all incoming messages
from specified senders (bit 7=0).
Forwarding
Y/NEXTi
Y/NEXTi
Y/hi
iOFF
4
63
Advertisement
Table of Contents
