Summer Time / Daylight Saving Time (Function 62) - Gestetner 9920 Operator's Manual

Installation
Then enter { { { { 9} } } } { { { { 1} } } } and the{ { { { Yes} } } }
key.
SAT
OCT. 24 1998 01:35PM
B
Change the month using { { { { *} } } } or
{ { { { #} } } } ({ { { { *} } } } to scroll forward, or { { { { #} } } } to
scroll backward) on the ten key
pad and press V V V V to move the cur-
sor.
TUE
NOV. 24 1998 01:35PM
C
Change the date with the ten key
pad as { { { { 3} } } } { { { { 0} } } } .
MON
NOV. 30 1998 01:35PM
D
Type in the year and time with
the ten key pad as { { { { 9} } } } { { { { 8} } } } { { { { 1} } } } { { { { 0} } } }
{2} { { { { 5} } } } .
MON
8
NOV. 30 1998 10:25PM
E
Change AM/PM using { { { { *} } } } or { { { { #} } } }
on the ten key pad.
Note
This machine treats the year set-
ting as follow:
If the lower 2 digits are greater
than 89, the year is 19xx, where
xx are the lower 2 digits.
If the lower 2 digits are 89 or
less, the year is 20xx, where xx
are the lower 2 digits.
MON
NOV. 30 1998 10:25AM
168
F
When the display is correct, press
the { { { { Yes} } } } and { { { { Function} } } } key.
*/#/Y
Summer Time / Daylight
Saving Time (Function 62)
Whenever local custom requires ad-
vancing the clock or setting the clock
back, use this feature. You can easily
move the clock forwards when day-
light saving time begins, and back
*/#/Y
when it ends.
When you install the machine for the
first time, take care that the setting is
correct before you set the date and
time.
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
KPAD/Y
the access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } {2}.
Then press { { { { 6} } } } { { { { 2} } } } .
SELECT LINE
B
Press V V V V until the display is as
*/#/Y
shown, and then press the { { { { Yes} } } }
key.
SUMMER TIME/DST
C
Use the W W W W and V V V V arrows on the
scroll key to switch the feature on
or off. This mode is off if the dis-
play is shown.
SUMMER TIME/DST Y/hi
ON
D
To store your setting, press the
{ { { { Yes} } } } key.
*/#/Y
E
Press the { { { { Function} } } } key to finish.
Y/NEXTi
Y/NEXTi
iOFF