Table of Contents
Advertisement
Saving Energy With The Power Saving
Timer
You can set sleep time to let the ma-
chine go to saving energy condition
and set the wake up time when it re-
turns to standby mode the next morn-
ing. During this Power Saver mode, a
fax message received is stored in the
memory and will be printed automat-
ically the next morning after the wake
up timer is activated.
As a typical example, you could pro-
gram the heating element inside the
printer to stay off at night and over
the weekend. (You can program dif-
ferent settings for every day of the
week.)
To use the Power Saving timer, you
must:
• Program the timers for each day of
the week.
• Switch the Power Saving timer fea-
ture on.
Setting the Power Saving time
( Function 71 )
Note
While the Power Saving timer is
active, all incoming calls are re-
fused if the memory fills up.
-
- Example:
-
-
For Tuesday, set the Power Saving
timer to switch the heater on at 9 am
and off at 6 pm.
Saving Energy With The Power Saving Timer
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } . Then
press { { { { 7} } } } { { { { 1} } } } and the { { { { Yes} } } } key.
SET TIMER
SUN
B
Use W W W W and V V V V to scroll through the
days of the week.
SET TIMER
TUE
Note
Example: Press V twice to go to
Tuesday.
C
Press the { { { { Yes} } } } key
TIMER#1 TUE
ON
FROM 12:00AM
D
To change the ON to OFF, or the
other way round, press the { { { { *} } } } or
{ { { { #} } } } keys.
Note
There are two timers for each
day, each with an ON/OFF set-
ting. "ON" means that the heat-
er will switch on at the time
indicated. "OFF" means that the
heater will switch off at the time
indicated.
E
Press V V V V to move the cursor under
the time.
TIMER#1 TUE
ON
FROM 12:00AM
Y/N/hi
4
Y/N/hi
*/#/Y
*/#/Y
71
Advertisement
Table of Contents
