Rds (Remote Diagnostic System); Switching Rds On/Off - Gestetner 9920 Operator's Manual

RDS (Remote Diagnostic System)

If your machine has a problem, a ser-
vice technician can perform various
diagnostic tasks over the telephone
line from the service station to try to
find out what is wrong with your ma-
chine. The service technician can also
use RDS to change some of your ma-
chine's settings if you request it.
For RDS to work, you must switch it
on before the service technician starts
the RDS operation on your machine.
For some RDS operations, it may be
necessary for you to stay near the ma-
chine.

Switching RDS On/Off

Before your machine can accept in-
coming calls from an RDS, you have
to switch RDS on using Function 62. If
it is switched off, the machine will not
accept treatment from an RDS.
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
the access number { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } {2}.
Then press { { { { 6} } } } { { { { 2} } } } and press the
{ { { { Yes} } } } key.
SELECT LINE
B
Scroll through the list of features
with W W W W key V V V V and until the screen
is as shown.
RDS ON/OFF
C
Press the { { { { Yes} } } } key.
RDS
iON OFF
D
E
Y/NEXTi
Y/NEXTi
Y/hi
RDS (Remote Diagnostic System)
Change the on/off setting by
pressing W W W W key or V V V V key.
Press the { { { { Yes} } } } and { { { { Function} } } }
keys to finish.
Note
RDS is automatically switched
off 24 hours after you switch it
on.
6
117