Gestetner 9920 Operator's Manual page 139

Troubleshooting
Code Possible Cause
0-07 The facsimile machine that you were sending to disconnected during the call,
either due to noisy phone lines, a paper jam or because it ran out of paper.
Resend the page.
0-08 The machine at the other end received the page that you sent but it had errors
on the page. You may want to resend the page in question.
The other party's memory could also be full. Contact the other party and ask
them to make room in their memory for your message.
0-14 Same as for code 0-06
0-15 The other terminal does not have a specific feature.
The other party's memory may be full.
0-16 Same as for code 0-04
0-20 Poor line condition
0-21 Same as for code 0-04
0-22 You have just received a fax message, but there were problems because of
poor line condition. Ask the other party to resend.
6
0-23 Same as for code 0-22
0-24 The memory may be full, and there may be a problem with your printer, such
as a jam or running out of paper or toner. Wait for some space to appear in
the memory, then solve the problem with your printer.
If the memory was not full, substitute reception may have been disabled;
switch substitute reception on using digit 0 of user parameter switch 05.
0-70 Incompatible or faulty terminal at the other end.
0-80 Poor line condition.
0-81 Incompatible or faulty terminal at the other end.
0-82 There is a problem with your machine.
0-83
0-84
0-85
0-86
0-87
0-88
1-00 Document jam
Improperly inserted document
1-01 Document length exceeded the maximum limit
Same as for code 1-00
2-xx Possible fault in your machine
126