Setting The Auto Ring Time - Gestetner 9920 Operator's Manual

Faxing
If you hear a voice
A Continue your conversation as
you would normally.
If you hear a fax tone
A Remove any documents from
the feeder, press the { { { { Start} } } } key
then replace the handset.
3
The machine will start receiv-
ing.

Setting the Auto Ring Time

In Auto mode, the machine rings a
number of times to give you the
chance to pick up the handset before
taking the call automatically. You can
alter the number of rings by changing
the Auto Ring Time.
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
the access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } {2}.
Then press { { { { 6} } } } { { { { 1} } } } and the { { { { Yes} } } }
key.
SET OWN NUMBER
B
Press V V V V until the following dis-
play appears.
SET NO. OF RINGS
C
Press the { { { { Yes} } } } key.
The factory setting will be dis-
played.
NO. OF RINGS
08 RINGS
18
D
E
Y/NEXTi
Y/NEXTi
Y/N
Note
If you wish to keep these set-
tings, go to step 5.
Press the { { { { No} } } } key, then press the
new number using the ten key
pad.
Press the { { { { Yes} } } } key, then the
{ { { { Function} } } } key.