1.
Insert the memory card carefully into the
slot on the left side of the machine.
7
Note
• Insert the Memory Card firmly or the machine may
not work properly.
2.
Attach the memory card cover.
Insert the tab of the cover in the slot ( ),
and fix the cover with the screw ( ).
Note
• You can use a coin-like object to fix the screw.
Connecting the
Power and
Switching On
R WARNING:
• Connect the power cord directly into a wall outlet and
never use an extension cord.
1.
Plug the cable into the outlet.
Warning
T Power requirements : 115V, 60Hz
T Insert the power plug securely into the outlet.
T Make sure that the outlet is near the machine and
readily accessible.
T Do not connect other equipment to the same outlet.
2.
Turn the power switch on.
Note
• If "Call Service" appears on the display after the
power switch is turned on, turn the power switch
off, and check whether the tape has been removed
from the toner cassette and PCU.
See "1. Preparing the Toner Cassette".
5