Symbols - Fluke Biomedical ProSim 8 User Manual

•
Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
•
Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures above
50 °C. If the batteries are not removed, battery leakage can
damage the Product.
•
Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and rated
for the Product.
•
Replace the mains power cord if the insulation is damaged
or if the insulation shows signs of wear.
•
Use only the external mains power supply included with the
Product.
•
Connect the battery charger to the mains power outlet
before the Product.
•
Do not put metal objects into connectors.
•
Do not connect the Product to a patient or equipment
connected to a patient. The Product is intended for
equipment evaluation only and should never be used in
diagnostics, treatment, or any other capacity where the
Product would come in contact with a patient.

Symbols

Table 2 describes symbols used in association with the Product.
Symbol Description
WARNING - RISK OF DANGER.
W
Consult user documentation.
Magnetic Field

Conforms to European Union
P
directives.
Conforms to relevant Australian

EMC standards.
Conforms to relevant South
Ã
Korean EMC Standards.
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
~
waste. Product Category: With reference to the equipment types in the WEEE Directive Annex I,
this product is classed as category 9 "Monitoring and Control Instrumentation" product. Do not
dispose of this product as unsorted municipal waste.
Table 2. Symbols
Symbol
WARNING. HAZARDOUS VOLTAGE. Risk of
X
electric shock.
Input jack for the DC output of the AC-DC supply
"
connector.
Certified by CSA Group to North American safety
)
standards.
Complies with 47 CFR Part 15 requirements of
Ž
the U.S. Federal Communications Commission.
Spent Lithium batteries should be disposed of by
a qualified recycler or hazardous materials

handler per local regulations. Contact your
authorized Fluke Service Center for recycling
information.
Vital Signs Simulator
Description
Symbols
3