Table of Contents
Advertisement
22:
The SKYWARN Scan List.
Press
List value, then press the SAVE softkey to save your changes to
the radioʼs configuration memory.
Deleting Objects
Objects that you no longer need to use can easily be deleted
from the PSR-600ʼs memory, making room for new objects.
To delete an object, press
navigate to the object you wish to delete. Press
delete the object. The scanner will ask you to confirm the delete
command before removing the object from the scannerʼs
memory. Deletions cannot be un-done.
To delete a TSYS, use the FIND feature to search for the TSYS
by name. Press
the FIND softkey, and use the Standard Text Entry Method to
enter all or part of the TSYS name you wish to delete. Press the
OK softkey to begin searching, and, if necessary, press the NEXT
softkey to continue searching until the desired TSYS is located.
Once the TSYS has been located, press the
FUNC CLR.
command before removing the object from the scannerʼs
memory, then, provide a final warning that all TGRPs associated
with the TSYS to be deleted will be lost if you proceed. Press the
YES softkey at both warnings to delete the TSYS.
An alternative method is to browse TSYS objects only using the
TSYS filter. Press
press the TSYS softkey. Scroll to the desired TSYS using the
keys, then press
confirm the delete command before removing the object from the
scannerʼs memory, then, provide a final warning that all TGRPs
associated with the TSYS to be deleted will be lost if you
proceed. Press the YES softkey at both warnings to delete the
TSYS.
Using Multi-Site Mode On Networked Systems
Some Motorola and P25 systems include a large number of sites
that are networked together to provide radio coverage to a large
geographical area. These types of trunked radio systems are
more commonly used for large statewide systems, and for some
systems that are used in large, rural counties.
PSR-600 User Manual
Page
ENT
or the Done softkey to store your new default Scan
PGM
, then press the EDIT softkey, then press
The scanner will ask you to confirm the delete
PGM
, then the EDIT softkey, then , and
FUNC CLR.
PGM
, then use the keys to
PGM
The scanner will ask you to
FUNC CLR
to
key, then press
66
Advertisement
Table of Contents
