Table of Contents
Advertisement
which makes it possible to mount the radio on top of any flat
surface in your vehicle.
Your PSR-600 is also designed to fit into a DIN-E compatible
sleeve, which makes it easy to mount the radio in an existing
radio or CD player dashboard opening. An optional DIN-E
installation kit can be purchased from GRE at :
http://www.greamerica.com.
NOTE:
In certain cases, installation of mobile communications electronics in
modern automobiles requires specialized tools, training, and
experience. If in doubt, seek assistance from a local car audio
Select a mounting location that does not interfere with visibility
while driving. Use caution not to select a location that may
interfere with the deployment of your vehicleʼs air bags. It is
extremely important not to mount this or any other equipment in
locations where deployment of the air bags may cause the
equipment to be propelled towards the vehicleʼs passengers. If
necessary, seek advice from your automotive dealer or service
shop.
Use the mounting bracket as a template to mark the locations for
the two mounting screws.
At the marked locations, drill holes that are slightly smaller than
the screws. Use caution not to damage wiring or components
that are located behind the mounting surface.
Using the provided screws and lock washers, attach the
mounting bracket to your vehicle.
Attach the two self-adhesive rubber washers to the inside of the
mounting bracket sides, over the holes that are used when
attaching the bracket to the scannerʼs side holes. The rubber
washers help protect the scannerʼs case from scratches.
Slide the scanner into the mounting bracket assembly, and use
the two provided knurled knobs to secure the scanner within the
mounting bracket.
Connect the supplied DC power cable to a power source in your
vehicle as follows:
PSR-600 User Manual
Page
electronics installation shop, or a local two-way radio dealer.
29
Advertisement
Table of Contents
