Table of Contents
Advertisement
TGRP Menu Reference
The TGRP menu is used when creating new Trunking Talkgroup
objects, or editing existing Trunking Talkgroup objects. All menus
are shown in the scannerʼs display as a three line window that
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle
parameter and is indicated by a flashing ":". The entire TGRP
menu is shown below:
TGRP
Parameter
Scan Lists
TSYS
ID
Type
Tag
L/Out
Priority
LED Mode
LED Color
Latch LED
Backlight
Alarm
PSR-600 User Manual
Page
Options
On or Off for Scan Lists
1-20
New or previously stored
trunking system object
(TSYS)
Decimal, hex or AFS
depending on TSYS type
Group or Private
Alpha-numeric text
On or Off
On or Off
Solid or Flash
0-7
On or Off
On, Off or Flash
None, Chirp, Hi-Lo, Alert,
Ring, 2-Chirp, Fast Hi-Lo,
DTMF#
Description
Sets membership in Scan Lists. Use keys to
scroll through Scan Lists. Use
Scan List membership. A "
number indicates that the object is mapped to that
Scan List.
To enter a new trunking system, use the keys
to scroll through the stored systems until NEW
SEL
appears, then press
to enter the parameters
for the new TSYS. To use a trunking system that
you have previously entered, use the keys to
scroll to the desired system.
The digital address of the talkgroup or individual
radio ID on the trunked radio system.
Use Group for talkgroup ID, Private for individual
radio ID.
The alphanumeric display name for the TGRP. Use
the standard text entry method or QTXT to name
the object.
Permanent lockout for the TGRP. Also accessed by
FUNC L/OUT
pressing
while the scanner is stopped
on the TGRP object.
Turns Priority Mode on or off for the TGRP object.
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
Sets LED color to 0-7 as defined in the GLOB
menu. By default, 0=LED Off, 1=Red, 2=Yellow,
3=Green, 4=Cyan, 5=Blue, 6=Magenta, 7=White.
Normally the ALERT LED is active only while the
object is receiving a transmission. When Latch is
on, the ALERT LED will remain lit after the
transmission is complete, unless overridden by a
subsequent object that is also using the ALERT
LED.
Controls whether the backlight should be on, off or
flashing while the object is active.
Sets the Audible Alarm for the TGRP object. When
an Audible Alarm is selected, the selected alarm will
play at the beginning of each transmission on the
TGRP object, or anytime the scanner stops for
activity on the TGRP object while scanning.
SEL
key to toggle
*
" next to the Scan List
104
Advertisement
Table of Contents
