Table of Contents
Advertisement
LMIT Parameter
Delay
Delay Time
Zeromatic
Search Dir
Hit Count
PSR-600 User Manual
Page
Options
Controls whether a Delay is used to wait for reply
On or Off
traffic after a transmission is received during the
LMIT search.
Sets the amount of time (in 100 millisecond
1-200
intervals) for the wait for reply delay if Delay is On,
e.g., 20=2 seconds.
When on, enhances the scannerʼs ability to lock on
On or Off
to the actual center frequency of a search hit
instead of an adjacent frequency.
Sets search direction used when LMIT object is
Up or Down
active.
Increments each time a transmission is received on
Numeric value
the SWPR object. Global "Hit Counts" must be set
to ON. Press the
Description
Dflt
softkey to reset to 0.
109
Advertisement
Table of Contents
