Deleting A Frequency From Achannel; Deleting All Channel Frequencies; Deleting All Locked Out Channel Frequencies; Monitor Memory - GRE PSR-216 Owner's Manual

DELETING A FREQUENCY FROM A
CHANNEL
1. Press PROG.
2. Use the number keys to enter the channel number con-
taining the frequency you want to delete.
3. Press PROG.
4. Press 0.
5. Press ENT.
The frequency is now deleted. To delete other frequen-
cies in the same way, use Steps 2-5.

DELETING ALL CHANNEL FREQUENCIES

1. Press PROG.
2. Press and hold CLEAR, then press 0. ALL Ch0000 ap-
pears in the display.
3. Press ENT to clear all frequencies from all channels. If
you do not clear all channels, press CLEAR to do so.
DELETING ALL LOCKED OUT CHANNEL
FREQUENCIES
1. Press PROG.
2. Press and hold CLEAR, then press L/OUT. L-o Ch0000
appears in the display.
3. Press ENT to clear all locked-out channels. If you do not
clear all locked-out channels, press CLEAR to do so.

MONITOR MEMORY

Once you have temporarily stored a frequency in a monitor
memory, you need to decide whether or not you want to
store it permanently in a channel.
Note: Remember that monitor memories are not scannable.
To Listen to a Frequency in Monitor Memory
Since you cannot scan monitor memories, you must manu-
ally select the frequency you want to hear.
1. Press MAN. MAN appears on the display.
2. Press MEM.
16
Page 16 2004/04/08, 16:50