Table of Contents
Advertisement
Getting Started
First Time Startup
We believe that your new PSR-600 is so easy to use that
scannists with minimal experience in the hobby should be able to
get up and running in a matter of just a few minutes. If you
already know the difference between a conventional channel and
a talkgroup, or a search range and a Spectrum Sweeper, we
invite you to dive right in and set the radio up to begin scanning
your first objects. If you get stuck, you can refer to this Getting
Started section, or see the relevant sections in the Detailed
Menu Reference. Otherwise, please read on and allow us to help
you get acquainted to your new scanner!
WARNING:
Always protect your scanner from exposure to extreme heat or
cold temperatures.
WARNING:
Your scanner is not waterproof. Do not expose it to rain,
extreme high humidity or moisture.
WARNING:
The external DC power input is designed to accept 12.0 - 14.4
VDC using a tip-positive coaxial power plug. Do not connect the
radio to external power sources that are greater than 16.0 VDC.
Ensure that the DC polarity is correct before connecting your
Unpack the radio
Unpack your radio carefully. Save all documentation and packing
materials in case it is necessary to return your scanner for repair.
Base operation
The mounting bracket can serve as a desktop stand when it is
attached such that it is positioned underneath the radio. You may
also use the mounting bracket indoors to attach the radio
underneath a table or shelf by installing the mounting bracket
such that it is positioned on top of the radio.
Attach the three self-adhesive rubber feet to the bottom of the
mounting bracket in the spaces provided. The rubber feet help
prevent sliding on smooth surfaces, and will help prevent
scratching of your desk or tabletop. Do not use the rubber feet if
PSR-600 User Manual
Page
radio to an external power source. Turn the radio off prior to
connecting or disconnecting external power.
27
Advertisement
Table of Contents
