20.4 Link Aggregation Setting
Use this screen to configure trunk groups on the switch. Click Advanced Application > Link
Aggregation > Link Aggregation Setting to display the screen shown next. See
on page 113
Figure 43 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 35 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Link
Aggregation
Setting
Group ID
Active
Slot
Port
Group
MS-7206 User's Guide
for more information on link aggregation.
DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
The field identifies the link aggregation group, that is, one logical link containing
multiple ports.
Select this option to activate a trunk group.
Select the slot at whose settings you want to look.
This field displays the port number.
Select the trunk group to which a port belongs.
Chapter 20 Link Aggregation
Section 20.1
115