Table of Contents
Advertisement
SDI Ancillary support for Closed Captioning, AFD and Teletext
SDI Ancillary data and OSD overlay have unique configuration for each SDI bank
Connector: Three BNC (75 Ohm), One SFP
note*: 3G-SDI Outputs have selectable Level A and Level B Dual Link output control to
retain interoperability with other third party 3G devices. The default mapping level is Level
A.
CVBS
SD NTSC or PAL D1 Composite Video Output (downscaled from HD source)
Supports Closed Captioning and Teletext
Connector: BNC (75 Ohm)
DVB-ASI
Standard: Asynchronous Serial Interface per EN500083-9
ASI Mirrored from DVB-ASI Input, IP Input, or RF Input with purchase of optional tuner package. All
streams are output as 188 byte packets.
Connector: Three BNC (75 Ohm)
AES Audio
Standard: AES3
8 pairs of decoded audio
Connector: Eight BNC (75 Ohm)
Analog Audio
Two balanced pairs via DB9 connector. (1 pair per DB9)
+18dBu nominal clipping level, -40 to +18dBu selectable.
Connector: Two DB9 (600 Ohm)
IP Output
Use: Output available for unicast/multicast transmit. TS input/output can share the same connector
as required.
Standard: UDP, RTP and SMPTE 2022 COP3 FEC
Supports 1 to 7 TS packets per IP packet
Output TS Rate: 250 Kb/s to 120 Mb/s
Connection speed: GigE (10/100/1000 Auto-Negotiate)
Transmit capability: x4 simultaneous MPEG over IP transport streams
Connector: x1 RJ45 (Connector is shared for Input/Output)
Communications
COM2 Serial Port
Use: API Serial Communication Interface
Default Baud Configuration: 38,400bps 8 data bits 1 stop bit no parity
Connector: 8 pin RJ45
COM1 Serial Port
Use: Serial Port Used for Troubleshooting (Terminal)
Connector: 8 pin RJ45 (supplied with DB9 to RJ45 adapter)
Advertisement
Table of Contents
