Adtec RD-70 User Manual page 67

10-bit / multi-codec 1080p receiver / decoder
Table of Contents

Advertisement

L-Band Demodulator (LB option)
note:​ Software keys are required to unlock full hardware support.
RF Inputs: Dual RF inputs capable of simultaneous lock
EN 302 207 and EN 300 421 compliant for single and multi-stream
Modulation Scheme support: QPSK / 8PSK / 16APSK / 32APSK
Long and Short frame support
Supported Roll-off: 5%, 10%, 15%, 20%, 25%, 35%
Supported Code Rates:
DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2 32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S symbol rate range: Up to 62Msym/s*
DVB-S2 symbol rate range: 1 - 65Msym/s (QPSK / 8PSK / 16APSK / 32APSK)*
Automatic Modulation Coding and Symbol Rate detection capability
frequency range: 950 - 2150MHz
min. input level: -65dBm**
max. input level: -25dBm**
LNB Power and Control:
13V (vertical polarisation)
18V (horizontal polarisation)
22kHz (band selection according to universal LNB for ASTRA satellites)
**input level dependent on function of MODCOD and baudrate
* Maximum supported baud rate is dependent on both tuners active state. One must be disabled to
achieve maximum symbol rate capabilities. View table below for symbol rate capabilities.
Modulation
QPSK
8PSK
16APSK
32APSK
Single Tuner (Msym/s)
65
65
65
54
Dual Tuner (Msym/s)
65
45
33
27

Advertisement

Table of Contents
loading

Table of Contents