Controls; Reset - Adtec RD-70 User Manual

Indicator Function
Alarm Off - No system alarms.
On - System alarm.
BISS Off - Decryption configuration is turned OFF
On - Decryption configuration is set to BISS1 or BISSE
Link Off - Network communication link not detected
On - Network communication link detected
Busy Off - No network activity
On - Network traffic present

Controls

Using the ​ M ode​ , ​ S elect​ , ​ E nter​ , ​ E scape​ , and directional buttons, the user can control the
unit via the front panel.
Control
Mode button
Select
Enter
Escape
Cursor Arrows
Programming
Keypad

Reset

Should you need to reset your device, you can do so via the front panel by pressing the MODE,
ESCAPE and RIGHT ARROW keys simultaneously.
(NTP or FAN alarm)
Function
Mode will cycle through top layer menus.
Select will enter into edit mode.
Enter submits any edited configurations.
Escape returns to the previous menu layer.
Arrows will navigate you within submenus
For value entry. F1 functions as a "+" or "-" operator. F2 functions
as a "." decimal or period.