Adtec mediaHUB-HD Pro Quick Start Manual

mediaHUB-HD Pro
Getting Started
Thank you for your purchase of the Adtec mediaHUB-HD Pro. This quick
start guide should help you with your initial setup. Further instructions are
available via the manual integrated into the on-board software. You can view it by
looking for the HELP tab once your unit is powered up and you are connected to
the web-application. This manual and the most recent firmware
See back for more details.
are available on our support website, www.adtecinc.com. Advanced users can also
find direct API command help as part of the on-board web application.
Front Panel LEDs:
Encode
Not Active
Pre-rolling
(Studio Encode)
Encoding
Transition
(Encoding to Idling)
Video
No Video
(Audio Only)
Video Present
Format Not Supported
No Video Present
Resolution
Standard Definition (
NTSC / PAL)
1080i HD
720p HD
Resolution
Resolution
Decode
Not Active
Decoding
Video
No Video
Decoding Video
Decoder Error
Decoder Fail
Resolution
Standard Definition (
NTSC / PAL)
1080i HD
720p HD
TM
Audio 1 & 2
Audio Not Enabled
Audio Enabled
Control
Control Mode Off
Control Detected/Remote Mode
Control Detected/Local Mode
Alarm
No Encoder Alarm
Encoder Alarm
Audio 1 & 2
No Audio Preset
Audio Present
Control (Not Implemented)
Alarm
No Decoder Alarm
Decoder Alarm
High Definition MPEG2 Encoder
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and
Encoder
System Decoder
Video
Login
Status Status
Duration
Conf. Decode Rate
Network
Auto Res. Chroma
Time Display Input
NTP
GOP
DVB-ASI Menu
Alarm GOP Str.
Aud. Track
Mirror
SDI Aud. Matrix GOP Size
COM2
Firmware
TM
System LED Status
Power
Busy
Power is OFF
No Network Traffic
Power is ON
Network Traffic Present
Alarm
HD
No System Alarm
High Def. Encoding Disabled
Minor Alarm
High Def. Encoding Enabled
Major Alarm
Link
No Link Detected
Link Active
enter to save selection.
Encoder
Transmit PID
Table
Audio
Samp. Freq. Mux Rate PCR Table
Prog. No.
A1 A2 Vid. AutoFill Closed Cap.
Line No.
Sync Map PID
Multicast Menu
Vid. PID Service Name
Input
Mode Aud.1 PID
Aud. 2 PID
Type
logged in by default. If you become
AMOL
Bitrate logged out and are prompted for a
password, use the following key
sequence for access.
Splice
Volume
Press <Select> when panel displays
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
mediaHUB-HD Pro
TM
Front Panel Status
Video Resolution Frame Rate Video Bit Rate
1920x1080 29i 33.77M
1DD 192K 2DD 192K 48
Audio Input 1 & 2
Quick Start Guide
Encrypt.
Pro le
Mode
Load
Clear Word
Save
Encrypt Word
User ID 1
UserID 2
Units ship with the front panel
'User Login -- logged out'
Sampling Rate