Adtec RD-70 User Manual page 65

10-bit / multi-codec 1080p receiver / decoder
Table of Contents

Advertisement

Baud Configuration: 115,200 bps 8 data bits 1 stop bit no parity
Ethernet Port
Use: ethernet port used for network control, but can be used for IP receive/transmit
Format: Ethernet 10/100BaseT
Communication Methods: WebUI, SNMP, Telnet, XCP
Connector: 8 pin RJ45
DB9 Parallel Port
Use: DB9 parallel port used for custom triggering / integration
Connector: DB9 Male
GPIO Port
Use: not used as this time
Connector: DB9 Male
Video and Audio
Video Decode
MPEG-2 SD (ISO/IEC 13818-2) Decode:
Format: 480i59.94, 576i50
Profiles: MP@ML, SP@ML, 422P@ML
MPEG-2 HD (ISO/IEC 13818-2) Decode:
Format: 720p50, 720p59.94, 1080i50, 1080i59.94
Profiles: 422P@HL, MP@H14L, MP@HL, SP@H14L, SP@HL
MPEG-4 SD (ISO/IEC 14496-10) Decode:
Format: 480i59.94, 576i50
Profiles: Baseline, Main (support 8 bits only)
MPEG-4 HD (ISO/IEC 14496-10) Decode:
Format: 720p50, 720p59.94, 1080i50, 1080i59.94, 1080p50, 1080p59.94, 1080p25, 1080p29.97
Profiles: High, High422 (support 8 bit and 10 bit)
Max Level: 4.1-4.2 (CABAC:50Mb/s, CAVLC:150Mb/s)
Supported tools support Baseline except ASO, FMO
Audio Decode
MPEG 1 Layer 2 audio (8 pairs)
Dolby Digital AC3 stereo downmix (8 pairs) *requires feature key
Audio Pass-through
Supports up to two Dolby-E 16/20 bit, Dolby Digital AC3 16 bit, and/or Linear PCM 16/20/24 bit
pass-through sessions. 24 bit input samples are truncated to 20 bits. Each SDI output contains all
active pass-through sessions.
Physical and Operational

Advertisement

Table of Contents
loading

Table of Contents