Adtec mediaHUB Pro Quick Start Manual

mediaHUB
Getting Started
Thank you for your purchase of the Adtec mediaHUB Pro. This quick start
guide should help you with your initial setup. Further instructions are available via the
manual integrated into the on-board software. You can view it by looking for the HELP
tab once your unit is powered up and you are connected to the web-application. See
back for more details. This manual and the most recent firmware are available on our
support website, www.adtecinc.com. Advanced users can also find direct API
command help as part of the on-board web application.
Front Panel LEDs:
Encode
Not Active
Pre-rolling
(Studio Encode)
Encoding
Transition
(Encoding to Idling)
Video
No Video
(Audio Only)
Video Present
Format Not Supported
No Video Present
Resolution
Standard Definition (
NTSC / PAL)
1080i HD
720p HD
Adtec Digital Technical Support: 615.256.6619 www.adtecinc.com 06.09.2011
Pro
High & Standard Definition MPEG2 Encoder
Audio 1 & 2
Audio Not Enabled
Audio Enabled
Alarm
No Encoder Alarm
Encoder Alarm
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and
Encoder Encoder
System
Video Audio
Login Samp. Freq.
Status
Duration A1
Rate
Network Chroma Sync
Time Input Input
GOP
NTP Mode
GOP Str.
Alarm Type
GOP Size
COM2 Bitrate
Hue
Firmware Volume
Bright.
Contr.
Satur.
TM
System LED Status
Power
Busy
Power is OFF
No Network Traffic
Power is ON
Network Traffic Present
Alarm
HD
No System Alarm
High Def. Encoding Disabled
Minor Alarm
High Def. Encoding Enabled
Major Alarm
Link
No Link Detected
Link Active
enter to save selection.
Transmit PID
Table
Mux Rate PCR Table
A2 Prog. No.
Vid. AutoFill VBI Source
Map PID
Closed Cap.
IP Destination 1-4
Vid. PID Srv. Name
Aud.1 PID Srv. Provider
Aud. 2 PID
Units ship with the front panel
logged in by default. If you become
TS ID
logged out and are prompted for a
password, use the following key
AMOL
sequence for access.
Press <Select> when panel displays
Splice 'User Login -- logged out'
Press <Up arrow>
Press <Select>
VITC Mode
Press <Enter>
Press <Right arrow>
VITC PID
Press <Enter>
mediaHUB-Pro
Front Panel Status
Video Resolution Frame Rate Video Bit Rate
1920x1080 29i 33.77M
1DD 192K 2DD 192K 48
Audio Input 1 & 2
Quick Start Guide
Encrypt.
Pro le
Mode
Pro le 1-10
Clear Word
Encrypt Word
User ID 1
UserID 2
Sampling Rate