Table of Contents
Advertisement
1)
Press as to select [INITIAL STARTUP].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[LAST MEMORY]
[STANDBY]
[ON]
[STARTUP INPUT SELECT]
Set the projection mode and input when the projector is turned on to start projection.
1)
Press as to select [STARTUP INPUT SELECT].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[LAST USED]
[HDMI]
[Miracast]
[Panasonic APPLICATION]
[MEMORY VIEWER]
[SIGNAGE]
[LIGHTING]
Note
f If [POWER] of the restart option is enabled in "Setting the restart option" (x page 71) which explains the [SETUP] menu → [SIGNAGE],
the input switches to signage regardless of the [STARTUP INPUT SELECT] setting, as the signage playback (schedule) restarts at the same
time when the power is turned on.
[AUDIO SETTING]
Set detailed audio functions.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation
Press w.
Press q.
Adjusting the right/left audio balance
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [BALANCE].
4)
Press qw to adjust the level.
Operation
Press w.
Press q.
Chapter 4 Settings — [SETUP] menu
Starts up the projector at the status before the power of the track system is turned off.
Starts up the projector in standby.
Starts projecting immediately.
Keeps the projection mode and input that has been selected the last time.
Sets the input to HDMI.
Sets the input to Miracast.
Sets the input to Panasonic APPLICATION.
Sets the input to Memory Viewer.
Sets the input to signage.
Starts projecting in the lighting mode.
Adjustment
Increases the volume.
Decreases the volume.
Adjustment
Increases the volume on the right.
Increases the volume on the left.
Range of adjustment
0 - 63
Range of adjustment
L16 - R16
ENGLISH - 73
Advertisement
Table of Contents
