Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Operating with the remote control
Switching the projection mode
Switch the projection mode.
button
1)
Press the <LIGHTING/PROJECTOR> button.
f Switches to the lighting mode when pressed during the projector mode.
f Switches to the projector mode when pressed during the lighting mode.
Note
f An image cannot be projected in the lighting mode.
f The [MAIN MENU (PROJECTOR)] screen is displayed when the on-screen menu (menu screen) is displayed during the projector mode,
and the [MAIN MENU (LIGHTING)] screen is displayed when the on-screen menu (menu screen) is displayed during the lighting mode.
f It may take up to tens of seconds to complete the switching when the projection mode is switched. [Please wait...] is displayed on the
projection screen when the switching takes time.
Switching the input
The input for projection can be switched.
1)
Press the <HDMI>, <MEMORY VIEWER>, <Miracast>, <Panasonic APP>, or <SIGNAGE> button.
<HDMI>
<MEMORY VIEWER>
<Miracast>
<Panasonic APP>
<SIGNAGE>
Note
f Pressing these buttons during the lighting mode will switch to projector mode, and image from each input is displayed.
f When the <HDMI>, <MEMORY VIEWER>, <Miracast>, <Panasonic APP>, or <LIGHTING/PROJECTOR> button is pressed during signage
playback, the signage playback is stopped and switches to respective input or projection mode.
f Pressing the <SIGNAGE> button while the signage playback is stopped will switch the input to signage, and the signage playback will start
or resume.
f Refer to "Content Manager" (x page 126) for the signage playback.
button
Switches the input to HDMI.
Switches the input to Memory Viewer. (x page 66)
Switches the input to Miracast. (x page 125)
Switches the input to Panasonic APPLICATION.
Switches the input to signage. (x page 126)
ENGLISH - 53
Advertisement
Table of Contents
