Table of Contents
Advertisement
r [Interrupt registration] screen
This is the screen displayed after selecting still image content to be used for interruption playback.
1
2
3
4
5
6
1
Interrupted still image content name
Enter the interrupted still image content name.
2
[Start]
Sets the time to start interruption playback.
3
[End]
Select the radio button, and set the time to end the interruption
playback.
4
[Duration]
Select the radio button, and set the time to start the interruption
playback.
r Procedure
1)
Click
.
f The [Interrupt registration] screen is displayed.
2)
Click the [Select] button.
f The file selection screen is displayed.
3)
Select still image content used for interruption playback (one file at a time), and click the [Open]
button.
f The [Interrupt registration] screen display is updated.
168 - ENGLISH
Chapter 5 Operations — Content Manager
5
Interrupted still image content being selected
Displays the selected still image content.
6
[Return] button
Click this to return to the [Interrupt list] screen.
7
Projector time
Displays the time of the connected projector.
8
[Save] button
Click this to confirm the settings, and register the interruption
schedule in the SD card.
7
8
Advertisement
Table of Contents
