Table of Contents
Advertisement
[Power]
[Image content]
f When you set [Restart option] in the [System setting] page, the setting is reflected in the menu setting of the projector. Refer to "Setting the
restart option" (x page 71) which explains the [SETUP] menu → [SIGNAGE].
Obtaining a backup of a schedule
Download a registered schedule into the client computer (only Windows computer/Mac are supported).
r [Data management] page
1
2
3
5
4
1
[Backup] - [All schedule]
Sets the backup target to be all schedules.
Select this radio button to include all the registered schedules in
backup targets.
2
[Backup] - [Schedule(Week)]
Sets the backup target to be the schedule of day of the week.
When this radio button is selected,
registered day of the week schedule can be selected.
r [Backup file list] screen
1
Chapter 5 Operations — Content Manager
[Enable]
[Disable]
[Enable]
[Disable]
is enabled and a
Signage playback (schedule) resumes when power off/on registered
in the schedule is performed, or the power <v/b> button on the
remote control or power supply control by a command is performed,
and then the input switches to signage.
Signage playback does not resume even when power off/on
registered in the schedule is performed, or the power <v/b> button
on the remote control or power control by a command is performed.
Signage playback (schedule) resumes at the playback start time of
the image content (still image/movie/external input display content/
playlist in the SD card) set in the schedule, and then the input
switches to signage.
Signage playback does not resume even at the start time of the
image content (still image/movie/external input display content/
playlist in the SD card) set in the schedule.
3
[Backup] - [Schedule(Date)]
Sets the backup target to be the schedule of the specified date.
When this radio button is selected,
registered schedule can be selected by specifying the date.
4
[Backup] button
Click this to save the selected backup target data into the client
computer.
5
[Undo] button
Click this to undo the backup target setting to the state before
displaying the [Data management] page.
is enabled and a
2
ENGLISH - 177
Advertisement
Table of Contents
