Table of Contents
Advertisement
4)
Select the content to register (1 file at a time), and click the [Open] button.
f The content information entry screen is displayed.
5)
Enter any [Content name] and [Duration], and click the [Enter] button.
f For [Content name], up to 24 characters in single byte can be input.
f Even when the content name is different from the file name, the file name itself is not changed.
f [Duration] can be input only for still image content.
f Those are registered in the [Add content] screen.
f To continue to add content, go back to Step 3), or to delete content from the [Add content] screen, go to Step 6), and to end adding
content, proceed to Step 10).
f Up to 10 contents can be registered in the [Add content] screen.
6)
To cancel addition of content, click
f The mode changes to deletion mode.
7)
Select the content for which you want to cancel addition.
f You can select multiple contents.
8)
Click the [Delete] button.
9)
When the confirmation screen is displayed, click the [OK] button.
10) When addition of contents to register is complete, click the [Save] button.
f Added contents are registered in the SD card.
Note
f The maximum number of still image/movie/music files that the Content Manager can control is 500 each.
However, it may not be possible to register 500 files depending on the capacity of the SD card.
Chapter 5 Operations — Content Manager
on the [Add content] screen.
Content deletion
ENGLISH - 145
Advertisement
Table of Contents
