Table of Contents
Advertisement
3
Projection lens
4
Indicators (x pages 21, 199)
5
Remote control signal receiver
6
Power <v/b> button
Turns on/off the power of the projector. (x page 44)
7
Rotating fixing screw
Tightens and fixes the rotation of the shaft holder after adjusting
the orientation of the main unit. (x page 37)
8
Ball joint fixing screws
Tightens and fixes the ball joint movable part after adjusting the
orientation of the main unit. (x page 37)
9
Track mount part B (x page 32)
10 Lever B
11 <AC IN> terminal
This is the terminal to connect the supplied adapter.
12 Hook clasp B
13 <AUDIO OUT> terminal
This is the terminal to output audio signal when a audio signal is
input to the <HDMI IN> terminal and when the movie with audio
in the SD card is played back. (x page 41)
r Indicators
1
Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power. (x page 44)
2
Light source indicator <LIGHT>
Displays the status of the light source. (x page 199)
Chapter 1 Preparation — About your projector
14 <DC OUT> terminal
This is the USB terminal only used for power supply. (DC 5 V,
maximum of 900 mA)
This can be used when the power supply to a Bluetooth
transmitter, etc. is required.
15 Connecting terminals (x pages 22, 41)
16 Track mount part A (x page 32)
17 Lever A
18 Stopper for lever A
19 Lever plate A
20 Hook clasp A
21 Pole
22 Shaft holder
23 Ball joint movable part
24 Shaft
25 Ball joint
1
ON(G)/
STANDBY(R)
2
LIGHT
3
TEMP
4
SD
3
Temperature indicator <TEMP>
Displays the internal temperature status. (x page 200)
4
SD card indicator <SD>
Blinks in green when accessing the SD card.
audio
®
ENGLISH - 21
Advertisement
Table of Contents
