Table of Contents
Advertisement
2)
Press qw to select [USER1], [USER2], or [USER3].
3)
Press the <ENTER> button.
f The [WIRELESS LAN] ([USER1], [USER2], or [USER3]) screen (1/2) is displayed.
4)
Press as to select [NAME CHANGE].
5)
Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
6)
Press asqw to select a character, and press the <ENTER> button to enter.
f Up to eight characters can be entered.
7)
After the name has been entered, press asqw to select [OK], and press the <ENTER> button.
f When you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will not be registered and the
factory default name will remain.
8)
Press as to select [NEXT], and press the <ENTER> button.
f The [WIRELESS LAN] ([USER1], [USER2], or [USER3]) screen (2/2) is displayed.
9)
Press as to select [STORE], and press the <ENTER> button.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [WIRELESS LAN] ([USER1], [USER2], or
[USER3]) screen (1/2).
10) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[NETWORK CONTROL]
Set up the control method of the network.
1)
Press as to select [NETWORK CONTROL].
2)
Press the <ENTER> button.
f The [NETWORK CONTROL] screen is displayed.
3)
Press as to select an item, and press qw to change the setting.
[WEB CONTROL]
[PJLink CONTROL]
[COMMAND CONTROL]
[COMMAND PORT]
[Crestron Connected(TM)]
[STORE]
4)
Press as to select [STORE], and press the <ENTER> button.
5)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[Panasonic APPLICATION]
(Only in the projector mode)
Configure the settings of the functions used when devices are connected to the projector via LAN using Panasonic's network application
software.
Setting [LIVE MODE CUT IN]
Set whether to accept live mode cut-in by another user during live mode processing (image transfer) by "Wireless Manager ME6.2" or image
distribution by "Multi Projector Monitoring & Control Software".
1)
Press as to select [Panasonic APPLICATION].
2)
Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3)
Press as to select [LIVE MODE CUT IN].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [NETWORK] menu
Set to [ON] to control with the web browser.
Set to [ON] to control with the PJLink protocol.
Set to [ON] when you control the projector using control commands. Refer to "Control commands via
LAN" (x page 206).
Set the port number used for command control.
Set to [ON] when you control the projector using Crestron Connected
Save the current network control settings.
of Crestron Electronics, Inc.
TM
ENGLISH - 81
Advertisement
Table of Contents
