Table of Contents
Advertisement
You may now close the update window and start using your FMB630 device.
5
OPERATIONAL BASICS
5.1 Operational principles
FMB630 module is designed to acquire records and send them to server. Records contain
GPS and I/O information. Module uses GPS receiver to acquire GPS data and is powered with 3
data acquire methods: time-based, distance-based, angle-based and speed-based. Method's
details are described in Data Acquisition chapter 9. All data is stored in flash memory and later
can be sent via GPRS or SMS channels. GPRS mode is the most preferred data sending mode.
SMS mode is mostly used in areas without GPRS coverage or when GPRS usage is too expensive.
GPRS and SMS settings are described in chapters 6.3.5.1 and 6.3.5.3. FMB630
communicates with server using special data protocol. Data protocol is described in device
protocols documentation. Please contact Teltonika sale manager to find out more about
protocols documentation purchase.
FMB630 can be managed by SMS commands (SMS Command list is described in SMS
Command List section) and GPRS commands (GPRS Command list is described in GPRS Command
List
section).
Module configuration can be performed over TCP or via SMS. Configuration
parameters and modes are described in device protocols documentation.
Figure 19 FM firmware updating finished
27
Advertisement
Table of Contents
