Command
Description
flush
Initiates all data sending to specified target server
#,#,#,#,#,#,#
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
sn x [x=0;1]
Enable/disable static navigation
banlist
Banlist information
crashlog
Crash log information
delete_all_sms Delete all read SMS
getgnss
Current GNSS information
odinfo
Current odometer information
prof2backup
Saves configuration to backup
backup2prof
Recovers saved profile
backupinfo
Backup information
14.1 getstatus
Response details
Description
Data Link
Indicate module connection to server at the moment: 0 – Not connected, 1
– connected
GPRS
Indicate if GPRS is available at the moment
Phone
Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 – ringing, 4 –
call in progress, 5 – asleep
SIM
SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
OP
Connected to GSM Operator: Numerical id of operator
Signal
GSM Signal Quality [0-5]
NewSMS
Indicate if new message received
Roaming
0 – Home Network, 1 – roaming
SMSFull
SMS storage is full? 0 – ok, 1 – SMS storage full
LAC
Location Area Code
Celll ID
Cell ID
Network Type
Information about connected network: 0 – 3G, 1- 2G
Active SIM
Active SIM
Answer Example: Data Link: 1 GPRS: 1(1) Phone: 0 SIM: 0 OP: 22288 Signal: 5 NewSMS: 0
Roaming: 0 SMSFull: 0 LAC: 26050 Cell ID: 34371 Network Type: 1 SIM1
14.2 getweektime
Response details
Description
Clock Sync
Indicates system clock synchronization status. 0 – System is not
synchronized, 1 – System synchronized
Table 36 getstaus command response
Table 37 getweektime command response
Response
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
99